Electrostatic powder coating
60–100 kV guns attract powder evenly to grounded metal. Typical film 60–120 microns, cured at 180–200°C.
- Edge coverage and Faraday cage penetration
- RAL, Pantone and metallic matching
Capability sheet
Use this when you specify a batch. We confirm shade and DFT before production.
| Metals | Mild steel, stainless steel, extruded aluminum, cast iron and mixed alloys |
|---|---|
| Pre-treatment | 7-stage chemical line — degrease, pickle, rinse, phosphate or zirconium conversion |
| Application | Electrostatic corona spray, 60–100 kV |
| Film thickness | Typical 60–120 µm, agreed per job |
| Cure | Oven 180–200°C for 10–20 minutes |
| Finishes | Gloss, satin, matt, wrinkle, leatherette, hammer-tone, metallic and clear; RAL / Pantone match |
| Standard turnaround | 2–4 business days. Large batches or custom shade matching can take longer |
| Inspection | DFT gauge, ASTM D3359 adhesion, visual cover; MEK rub where cure must be proven |
7-stage chemical pre-treatment
Degreasing, pickling, rinsing and phosphate or zirconium conversion to stop under-film corrosion.
- 1000+ hour salt spray barrier
- Longer life in outdoor service
Custom finishes
Gloss, satin, matt, wrinkle, leatherette, hammer-tone, metallic bronze and clear coats.
- UV-stable architectural grades
- Anti-bacterial and chemical-resistant options
What to send for a quote
The more complete this list, the faster we can price and slot the job.
- Metal type (MS, SS, aluminum, cast / mixed)
- Piece size and quantity / batch size
- Colour — RAL, sample panel or closest reference
- Drawings or photos of geometry and weld areas
- Duty (indoor, outdoor, chemical, wear) and any deadline
- Packing, masking and what not to send
Industries we serve
Automotive & fleet
Chassis parts, alloy wheels, suspension arms and calipers.
Architectural steel
Extrusions, curtain wall, frames and railings.
Electrical enclosures
Control panels, switchgear and generator housings.
Commercial hardware
Display racks, outdoor furniture and lighting poles.
Why powder coating
Extreme durability and anti-corrosion
A dense cross-linked barrier that resists chipping, scratching, fading and chemicals. Proven beyond 1000 hours ASTM B117 salt spray after full pre-treatment.
Eco-friendly, zero VOCs
No liquid solvents, no VOCs or HAPs — a cleaner alternative to wet paint on the shop floor and in the field.
High material utilization
Overspray can be recovered in cyclone booths, with material use up to 98% and less waste.
Cleaner aesthetics
Uniform coating on complex shapes without runs or sags, in thousands of colours and textures.
Specify a finish for your batch
Send metal type, colour and quantity — we will come back with a clear quote.